Formulation and Evaluation of Herbal De-Tanning Gel
Siddhi Sudhir Sonawane1, Samrudhi Chandrakant Sonawane2,
Mayuri Ramdas Thail3, Kirti Sanjay Pawar4
Department of Pharmacognosy, Swami Institute of Pharmacy, Abhona, Tal. Kalawan,
Dist. Nashik, Lonere, Raigad: Dr. Babasaheb Ambedkar Technological University.
*Corresponding Author E-mail: siddhisonawane2206@gmail.com, samrudhisonawane743@gmail.com, mayurithail04@gmail.com, kirtipawar20399@gmail.com
ABSTRACT:
Long-term exposure to ultraviolet (UV) radiation causes skin tanning, a frequent dermatological problem that results in pigmentation, uneven skin tone, and loss of natural skin brightness due to excessive melanin production. The need for safe, efficient, and natural substitutes is rising as people become more conscious of the negative consequences of synthetic chemicals found in traditional cosmetic products. The goal of the current study is to create and assess a herbal de-tanning gel with plant-based components that have been shown to have skin-beneficial qualities. Natural ingredients including nutmeg, sandalwood, turmeric, aloe vera gel, honey, and herbal extracts like Shikakai and ReethA were used to create the recipe. A stable semi-solid preparation was achieved by using xanthan gum as a gelling agent. A variety of physicochemical and performance metrics, such as organoleptic properties, pH, spread ability, viscosity, washability, and skin irritation, were assessed for three distinct formulations (F1, F2, and F3). Desired characteristics like consistent appearance, pleasant odor, and smooth texture were demonstrated by the created formulations. The pH levels were found to be suitable for topical application, falling within the recommended skin range of 5.0–6.5. Washability studies demonstrated that the gel could be readily removed without leaving any residue, while spreadability results validated the gel's ease of application. Measurements of viscosity showed good consistency, especially in formulation F3, which performed at its best. The safety of the herbal formulation was confirmed by the skin irritation (patch test) investigation, which showed no indications of redness, itching, or irritation.
KEYWORDS: Skin pigmentation, Melanin reduction, Herbal cosmetics, Herbal detanning gel Topical formulation, Antioxidants, Nutmeg, Sandalwood.
INTRODUCTION:
The largest organ in the human body, the skin is essential for defense against external elements including sunshine, pollution, and dangerous substances. Skin tanning, pigmentation, dullness, and uneven skin tone are all results of increased melanin production brought on by prolonged exposure to ultraviolet (UV) radiation from the sun. Tanning is the skin's natural defense mechanism, but too much melanin buildup can harm skin health and attractiveness. Because herbal and natural cosmetics are safer, more effective, and have less side effects than synthetic formulations, there has been an increase in demand for them in recent years.1
Chemicals like hydroquinone, parabens, and steroids are frequently found in conventional de-tanning solutions, which may irritate, dehydrate, or harm skin over time. Because they are eco-friendly, biocompatible, and appropriate for all skin types, herbal formulations are seen to be a superior substitute.1,2
A semi-solid topical solution called a de-tanning gel is intended to lessen pigmentation, eliminate tan, and restore the skin's natural radiance. Because they are non-greasy, easily spreadable, rapidly absorbed, and have a cooling effect when applied, gels are favored over creams and ointments. Because they are comfortable and simple to use, they also improve patient compliance1.
De-tanning:
Generally speaking, "de-tanning" refers to the process of lightening or eliminating a tan from the skin. When the skin is exposed to ultraviolet (UV) radiation from the sun or artificial sources like tanning beds, tanning takes place. Melanin, a pigment that darkens the skin as a natural reaction to shield it from the damaging effects of UV radiation, is produced as a result.
When someone wants to de-tan, they want to lessen or reverse the tanning-induced darkening of their skin. Using different skincare techniques or products that try to lower melanin synthesis or encourage the shedding of the darker, tanned skin cells may be part of this process. The goal of de-tanning was to encourage a more even complexion and naturally lighten the skin tone. But it's important to keep in mind that it can take some time to achieve noticeable skin tone improvements, and individual outcomes may differ1.
Factors that Impact Tanning:3
The skin's reaction to UV radiation or sun exposure can be influenced by a number of factors. Here are a few crucial elements:
1. Skin Type: Different skin types have variable levels of melanin, the pigment responsible for skin colour. Compared to people with darker complexion, folks with pale skin typically burn more easily and tan more slowly.
2. Melanin Levels: The skin's melanin content is a major factor in tanning. People with higher melanin levels may burn less and tan more readily.
3. Genetics: A person's skin tone, melanin synthesis, and reaction to UV radiation are all greatly influenced by genetic factors.
4. UV Exposure: The degree of tanning is influenced by the duration and intensity of UV exposure. Darker tans can result from prolonged exposure to intense sunlight or artificial UV radiation.
5. Geographic Location: The distance from the equator, altitude, and geographic location all affect how intense the sunshine is. Individuals who live in areas with more sunlight may tan more quickly.
6. Time of Day: From 10 a.m. to 4 p.m., sun exposure is often at its highest. A more noticeable color shift may occur from tanning during these busy times.
7. Seasonal Variations: Depending on the season, tanning may change. In the summer, when there is more.
8. Use of Sunscreen: Using sunscreen with a high SPF helps shield the skin from UV radiation and stop tanning. Sunscreen lessens the effects of UV light on the skin by absorbing or blocking it.
9. Drugs and Skincare Products: The tanning process may be impacted by some drugs and skincare products that increase sensitivity to sunlight or trigger photosensitivity reactions.
10. Age: Younger people tend to tan faster than older people. Tanning may become less effective when the skin's capacity to manufacture melanin declines over time.
11. clothes and Sun Protection Measures: You can reduce UV exposure and the tanning impact by wearing hats, sunglasses, and protective clothes, as well as by looking for shade1,3.
Figure 1: UV Index
Skin Physiology and Anatomy:
Figure 2: Anatomy of the Skin
The body's largest organ is the integumentary system. When the body comes into contact with the outside world, it creates a protective layer. The control of body temperature is mostly dependent on the skin.
There are two Layers to Skin:
i. The epidermis is the outermost layer.
ii. The dermis is the inner layer.
Skin Structure:3,4
Epidermis:
It is the skin's outermost layer. Stratified squamous epithelium makes up its composition. The five layers that make up the epidermis are as follows:
1) The stratum corneum
2) The lucidum stratum
3) Granulosum stratum
4) The spinosum stratum
5) The germinativum stratum
1) Corneum Stratum:
· This layer is the most superficial.
· The cells include keratin.
· There are no nuclei.
2) Stratum Lucidum:
· This is a thin, shiny layer that is essentially transparent.
· Cytoplasm is present in the cell.
3) Granulosum Stratum:
· Spindle-shaped cells are found in this stratum.
· These cells have a nucleus and cytoplasm.
4) Stratum Spinosum:
· It has polyhedral cells.
5) Stratum Germinativum:
· This layer is made up of a single layer of cuboidal cells or columnar epithelium.
· The dermis is related to this layer.
· This stratum contains melanin pigments.
Dermis:
· It is very vascular and made of connective tissue.
· It is composed of fibroelastic tissue, which keeps the skin's texture intact.
Dermal Glands:
1) The sebaceous gland
2) The sweat gland
3) The ceruminous gland
4) The erector pili muscles and hair roots
1) Sebaceous Gland:
· These glands are fashioned like flasks.
· Sebum is a substance they secrete that resembles oil.
· They have a duct that leads to a hair follicle.
· It keeps the skin from drying out and from evaporating too much water.
· Except for the skin on the palms of hands and soles of feet, sebaceous glands are found in numerous regions of the body.
2) Sweat Gland
· Eccrine and apocrine sweat glands are the two varieties.
· The body has eccrine glands everywhere.
· The axilla, female genitalia, and the area surrounding the nipples all have apocrine glands.
· Apocrine glands produce milky sweat, while eccrine glands produce watery perspiration.
3) Ceruminous Gland:
· They secrete wax in the external ear.
4) HAIR ROOTS AND ERECTOR PILI MUSCLES
· Contraction of these muscles produces straightening of the hair.
Skin Function:4
1. The skin shields the body from harm and bacterial invasion.
2. It controls body temperature.
3. The skin acts as a conduit for feelings such as warmth, pressure, and touch.
4. It eliminates metabolites including urea and salt chloride.
5. It keeps electrolyte and water balance.
6. Sunlight's UV rays cause the skin to produce vitamin D from ergosterol.
7. Tyrosine is converted to melanin.
8. It secretes sebum and perspiration, which maintains the skin's suppleness.
9. It holds sugar, chlorides, water, and fat1.
Gel:5,6,7,8
These are semi-solid dispersion systems with sufficient amounts of a gelling agent to create a three-dimensional polymeric matrix. give a cooling effect when applied to the skin. often non-greasy and transparent. They serve as lubricants for medications. typically used in formulations applied to the skin or mucous membranes. This is a semi-rigid structure where a three-dimensional system of interlaced particles limits the dispersing medium's movement in the dispersed phase. Large amounts of watery or hydroalcoholic fluid are entangled in a system of colloidal solid particles made up of inorganic materials or organic polymers from natural or manufactured sources3,6.
Classification of Polymers used in gel Preparation:8, 25
Polymers are utilized to generate gel structures.
The following categories apply to polymers that form gel:
Natural polymer:
· Proteins: Collagen and gelatin
· Polysaccharides: Agar, alginic acid, guar gum,
· xanthan, pectin, and tragacanth
Semisynthetic Polymers:
· Cellulose derivatives
· methyl cellulose
Synthetic Polymers:
· Carbomer
· The co-polymer of polyethylene
Active Agents on the Surface:
· Ceto stearyl alcohol
· Brij-96
Inorganic Material:
· Bentonite
· Aluminum hydroxide
Benefits:
1. Compared to other formulations, gels are simple to produce.
2. A classy, non-greasy recipe.
3. Outstanding adherence to the application site.
Drawback:
1. The effects of gels are slower and more prolonged.
2. The chemicals or gelatos could irritate your skin.
3. The presence of water in gel raises the risk of microbial or fungal attack3.
Classification of gel:
Gels are categorized based on their physical characteristics, the type of solvent they include in colloidal phases, and their rheological characteristics.
1. Colloidal phase-based:
i) Inorganic (two-phase system)
ii) Organic (one-phase system)
i) Two phase system: If the dispersed phase's particle size is quite large and creates the three-dimensional structure throughout the gel, this kind of system is composed of floccules of microscopic particles.
ii) Single-phase systems: These are made up of big organic molecules that are dissolved in a continuous phase on twisted strands. These big organic molecules, which can be synthetic or natural polymers, are known as gel formers because they are linked together by Vander Waals forces or entangled with one another rather than moving randomly.
2. Depending on the Solvent's Nature:6
i) Water-based hydro gels: These are made up of a continuous liquid phase of water. For example, bentonite magma, poloxamer gel, carbopol, cellulose derivatives, and gelatin.
ii) Organic Gels (with a non-aqueous solvent): These gels have a non-aqueous solvent as their continuous phase. For example, Olag (aerosol gel), metallic stearate dispersion in oils, and plastibase (low molecular weight polyethylene dissolved in mineral oil and rapidly chilled).
iii) Xerogels: Xerogels are low-solvent solid gels. These are made by removing the gel structure through solvent evaporation or freeze drying. When they come into contact with fresh fluid, they might be reconstituted and swell. For example, tragacanth ribbons, polystyrene, dry cellulose, β-cyclodextrin, and acacia tear.
3. Based on Rheological Properties: gels usually exhibit non-Newtonian flow properties. They fit into the following groups:
i) Gels made of plastic: For instance, Bingham bodies and flocculated solutions of aluminum hydroxide show a plastic flow; the rheogram plot indicates the gels' yield value, at which the elastic gel deforms and starts to flow.
ii) Gels made of pseudo-plastic: such as tragacanth, sodium alginate, Na CMC, and other liquid dispersions. flow that is pseudo-plastic. These gels have no yield value and their viscosity diminishes as the shear rate increases. Shearing of the linear polymers' long chain molecules produces the rheogram. As the shearing force increases, the disordered molecules begin to align their long axes in the direction of flow with the loss of solvent from the gel matrix.
iii) Thixotropic gels: Shaking can break the incredibly weak particle interactions in these gels. The resultant solution will revert to gel as the particles collide and re-link. (Reversible isothermal gel-sol-gel transition). This occurs in a colloidal system with non-spherical particles to form a scaffold-like structure. For example, kaolin, bentonite, and agar.
4. In terms of physical nature:
i) Elastic gels: Alginate, pectin, guar gum, and agar all exhibit elastic behavior. The fibrous molecules are held together at the junction by comparatively weak interactions such as dipole attraction and hydrogen bonds. If the molecule possesses a free -COOH group, a salt bridge of type COO–X–COO forms ten additional bonds between two adjacent strand networks. Carbopol and Alginate, for example.
ii) Rigid gels: These can be made from macromolecules whose framework is connected by a primary valence link. For example, silicic acid molecules are held together by the Si–O–Si–O link in silica gel, forming a polymer structure with a network of holes4,5,6.
Uses for gel:6,7
1. Used in both hard and soft gel tablets.
2. Suppository Eg-glycerin formulation in suppositories BP.
3. To create a formulation for continuous release.
4. Used to provide drugs via a variety of routes, including intranasal, intraocular, vaginal, rectal, intramuscular, and occasionally parenteral.
5. In the food and cosmetics sectors.
6. Dental formulas frequently contain sodium fluoride gel and phosphoric acid3,5.
Drug Profile:8,11,12,13,14
1. Nutmeg:
Figure 3: Nutmeg
Synonyms: Myristica and Nux moschata.
biological source: it is made up of dried Myristica fragrans Houtt seed kernels.
Family: Myristicaceae
Geographical sources: include Sri Lanka, Grenada, Indonesia, and India (Kerala and Tamil Nadu).
Morphological features:
1. Ellipsoidal shape
2. Dimensions: 15–20mm width by 20–30mm length 11
3. Odor: very fragrant
4. Taste: Strong and a little bitter
5. Color: The kernels are either brown or greenish-brown on the outside.
Chemical components: 30% fat and 5–10% volatile oils. Myristicin, elemicin, and safrole make up 4–8% of the volatile oil.
Therapeutic applications include:
i. Appetite stimulation, flatulence relief, and stimulation.
ii. Used in liniments as an analgesic and counter-irritant.
iii. Has mild exfoliating, antifouling, and antibacterial properties7.
2. Sandalwood:11,12,13,14
Figure 4: Sandalwood
Biological source: Santalum album Linn's dried heartwood.
Family: Santalaceae.
Geographic sources: include Australia, Indonesia, and southern India.
Morphological features:
i. Color: pale reddish-brown to yellowish-brown.
ii. Odor: A nice, lingering balsamic scent.
iii. Taste: A little bitter.
Chemical components:
i. East Indian sandalwood oil, a volatile oil (2–6%).
ii. Sesquiterpene alcohols (90%): mostly β- and α-santalol.
iii. Tannins and resins: Found in trace amounts.
Therapeutic applications:
i. One of its therapeutic uses is as an antiseptic for urinary tract infections.
ii. Skincare: Potent anti-inflammatory, anti-tanning and cooling agent.
iii. Aromatherapy: Used to promote relaxation and sedation.
Reetha and Shikakai's Extraction Procedure:16
Weigh out 10 grams of Reetha and Shikakai powder, add it to 150 millilitres of distilled
↓
water, soak it overnight, and then heat it for 30 minutes at a moderate temperature
↓
Let the mixture cool to room temperature
↓
Use a muslin cloth to filter the mixture. Gather the clear, brownish liquid
↓
Extract
Figure 5: Reetha-Shikakai Aqueous Extract Preparation (Heating and Filtration)
Table No.1: Formulation Table
|
Sr. No |
Components |
F1 |
F2 |
F3 |
|
1 |
Nutmeg powder |
0.75 gm |
1 gm |
1 gm |
|
2 |
Sandalwood powder |
1.25 gm |
2 gm |
3 gm |
|
3 |
Vitamin E |
2 Capsule |
2 Capsule |
2 Capsule |
|
4 |
Xanthan gum |
0.5 gm |
1 gm |
1 gm |
|
5 |
Aloe vera gel |
32.5 gm |
30 gm |
30 gm |
|
6 |
Honey |
5 gm |
5 gm |
5 gm |
|
7 |
Sodium Benzoate |
2.25 gm |
0.2 gm |
0.2 gm |
|
8 |
Reetha extract |
4 ml |
4 ml |
4 ml |
|
9 |
Shikakai extract |
4 ml |
4 ml |
4 ml |
|
10 |
Turmeric |
0.25 gm |
0.5 gm |
0.5 gm |
|
11 |
Orange Oil |
q. s |
q. s |
q. s |
|
12 |
Amaranth |
q. s |
q. s |
q. s |
|
13 |
Glycerine |
5 ml |
8 ml |
8 ml |
|
14 |
Purified Water |
50 ml |
100 ml |
100 ml |
The Gel Formulation Process:5,6
Pour the necessary amount of purified water into a beaker
↓
gradually add the xanthan gum; stir constantly
↓
hydrate and swell for 15 minutes; add the glycerine and honey; completely mix
↓
Add the aloe vera gel and stir constantly to achieve a consistent consistency
↓
Then, gradually add the nutmeg, sandalwood, and turmeric powders (finely sieved 80–100 mesh)
↓
Mix thoroughly to prevent lumps
↓
Reeth and shikakai extract should be added gradually
↓
Sodium benzoate should be dissolved in five millilitres of distilled water
↓
This solution should be added to the gel and properly mixed
↓
Vitamin E capsules should be cut and added to the gel along with oil
↓
Finally, amaranth and vanilla should be added and dissolved in water
↓
Use purified water to make up the volume. Gently mix to create a smooth gel. Let the gel stand for a while, Eliminate air bubbles11,12.
Evaluation factor:6,7,8,9,17,20,21,22,23
1. Organoleptic (Sensory) Assessment:
This entails examining the gel's appearance, smell, and feel. Color, texture, and odor were noted both visually and tactilely. The mixture should have a uniform look, a smooth, grainy texture, and a nice, natural scent.
2. Determining pH:
A digital pH meter was used to measure the gel's pH after a small sample had been dissolved in distilled water. To match the natural pH of the skin and avoid irritation, the ideal pH range for a de-tanning gel is 5.0 to 6.5.
Figure 6: Determining pH
3. Spreadability:
This test determines how readily the gel covers the skin. A standard weight was used to press a tiny amount of gel between two glass slides. Easy application and improved coverage during use are the results of good spread ability.
Figure 7: Test of Spreadability
4. Washability:
This feature evaluates the gel's ease of removal from the skin using water. A good gel should be easy to remove and leave no sticky or oily behind.
5. Patch Test for Skin Irritation:
To check for redness, itching, or irritation, a tiny bit of the gel was placed to a small region of the skin, such as the forearm, and it was monitored for a whole day. The product is safe to apply topically if there is no reaction.
6. Viscosity:
If a Brookfield viscometer was available, it was used to measure the gel's thickness, or it was determined by hand. The gel should be spreadable and semi-solid; it shouldn't be very thick or runny.
Figure 8: Using a Brookfield viscometer to measure the viscosity of gel
RESULT:
Table No. 2: Organoleptic Evaluation Test
|
Sr. No |
Parameter |
F1 |
F2 |
F3 |
|
1 |
Color |
Red |
Orange |
Orange |
|
2 |
Odor |
Pleasant |
Pleasant |
Pleasant |
|
3 |
Texture |
Mild spores |
Smooth |
Smooth |
|
4 |
State |
Semi-solid |
Semi-solid |
Semi-solid |
Table No.3: pH Observation
|
Sr. No |
Formulation |
pH |
|
1 |
F1 |
6.02 |
|
2 |
F2 |
5.09 |
|
3 |
F3 |
5.07 |
Table No.4: Spread ability Observation
|
Sr. No |
Formulation |
Time |
|
1 |
F1 |
8.48 |
|
2 |
F2 |
8.30 |
|
3 |
F3 |
8.00 |
Table No.5: Observation on washability
|
Sr. No |
Formulation |
Washability |
|
1 |
F1 |
Simple to wash |
|
2 |
F2 |
Simple to wash |
|
3 |
F3 |
Simple to wash |
Table No.6: Observation of irritation
|
Sr. No |
Formulation |
Irritation |
|
1 |
F1 |
No annoyance |
|
2 |
F2 |
No annoyance |
|
3 |
F3 |
No annoyance |
Table No.7: Gel Formulation viscosity observation
|
Sr. No |
Formulation |
Viscosity (CP) |
|
1 |
F1 |
10996 |
|
2 |
F2 |
11485 |
|
3 |
F3 |
11545 |
Figure 9: Anti- Tanning Gel
CONCLUSION:
Using natural elements including nutmeg, sandalwood, turmeric, aloe vera, and other herbal extracts, the current study effectively created and assessed an herbal de-tanning gel. Numerous physicochemical and performance metrics, such as organoleptic qualities, pH, spreadability, viscosity, washability, and skin irritation, were evaluated for the created formulations.6,7,8
Every formulation had acceptable qualities, including a suitable color, a pleasing smell, a smooth texture, and a reasonable consistency. It was discovered that the pH was within the permissible range for skin application, suggesting compatibility and a lower risk of irritation. The research on spreadability and washability verified that they were simple to apply and remove, increasing user compliance.22,23
The formulations had appropriate thickness for topical application, according to viscosity data, with formulation F3 exhibiting relatively improved stability and performance.
Since there were no indications of redness, itching, or irritation, the skin irritation (patch test) results showed that the produced gel is safe for topical administration. Herbal elements with established anti-inflammatory, antioxidant, and skin-lightening qualities add to the formulation's efficacy in minimizing tanning and enhancing the overall appearance of the skin.9
Overall, the study finds that the herbal de-tanning gel is a cost-effective, safe, and efficient substitute for artificial cosmetics. With few adverse effects, it has the ability to improve skin health and lessen skin tanning. To confirm its effectiveness and commercial applicability, more research involving long-term stability and clinical evaluation on a broader population is advised.25
REFERENCES:
1. Aditya Pradip Vekhande, Bhivsen, Vaishnav Devidas Dhumal, and Akshay Walku Kolambe Ashok Salve, Diksha Shivaji Waghamare. A Review of de-tanning soap with preparation techniques. International Journal of Novel Research and Development. 2024; IX(3).
2. The theory and practice book of industrial pharmacy, Roop K. Khar, SP Vyas, Farhan J. Ahmad, Gaurav K. Jain, Lachman/Liebermans, CBS Publications and Distributors Pvt. Ltd., Fourth Edition, 717-719.
3. A Book of Pharmaceutics, Dr. Devesh U. Kapoor and Dr. Manish Jaimini, Pee Vee Publisher, 2022, 110–112.
4. Suvarna Lata S. Mahajan, Drs. Md. Rageeb Md. Usman, Bharat Vijaykumar Jain, and Sameer S. Sheaikh, A Book of Pharmaceutics-I, Global Education, First Edition 2018, 210–212.
5. Umakant Sharma, Saurabh Arjariya, Rajendra Chuksey, and Neeraj Sharma. A review of pharmaceutical gel formulation and evaluation. Journal of Pharmaceutical Negative Results. 2022; 13(Special Issue 1): 1344-1362.
6. Chinmay Bhuyan, Dipankar Saha, and Bipul Rabha. A brief review of topical gel as a drug delivery vehicle. Journal of Pharmaceutical Research International. 33(47A): 344-357, 2021,
7. C.K. Kokate, A.P. Purohit, S.B. Gokhale, A book of pharmacognosy, Nirali Prakashan, Fifty edition: 14.55–14.56 September 2014.
8. Prasad B. Mhaske, Sarthak B. Nidhane, Sarthak D. Narode, and Suraj M. Gholap. Preparation and Evaluation of herbal nutmeg tan removal cream. International Journal of Novel Research and Development. 2024; IX(8).
9. Sajiya Anjum A. Sheikh, Mayuri N. Deshmukh, Vaibhav P. Uplanchiwar, Vinod M. Thakare, and Nisha L. Gaikwad. Formulation and Evaluation of herbal soap tanning removal and skin smoothing. International Journal of Pharmaceutical Sciences and Drug Analysis. 2023; 3(1): 104-108.
10. Yash Shashikant Pattankar, Sanjana Jagan Padvi, Durgesh Bharat Saindane, Pooja Gajamal Pawar, Rajesh A. Ahirrao. Formulation and Evaluation of herbal D-tan face pack. International Journal of Creative Research Thoughts. 2024; XII(7).
11. Commission on Indian Pharmacopoeia. Ghaziabad: Indian Pharmacopoeia, 2022.
12. Jamadar MJ, Shaikh RH. Herbal gel formulation preparation and assessment. Pharmaceutical Research and Education Journal. 2017; 1(2): 201-4.
13. Misal G, Dixit G, Gulkari V. Herbal gel formulation and assessment. Indian Journal of Natural Resources. 2012 Dec. 3(4): 501-5.
14. Sachin D. Kadam, Nikhil S. Khandave, Prasad D. Pandarkar, Sujata U. Veer, Amol N. Khedkar. Formulation and Evaluation of anti-tanning polyherbal soap utilizing papaya. IJIRMPS. 2024; 12(3).
15. Pharmaceutics: The Design and Manufacture of Medicines, M.E. and Taylor K. Aulton, Fifth Edition, Elsevier, 435-470.
16. Sejal Rajendra Chaudhari, Sunila A. Patil, S. P. Pawar. Topical Gel Formulation of Kojic Acid with Herbal Extracts for Skin Tone Enhancement and Melanin Regulation. Research Journal of Topical and Cosmetic Sciences. 2026; 17(1): 31-4. Doi: 10.52711/2321-5844.2026.00007.
17. Sanket Mhaske, Komal Mahadik, Tejal Meghawale, Pravina Kajwe, Auf Arai. Formulation and Evaluation of a Polyherbal Anti Acne Gel: Incorporating Dual Gelling Agent. Research Journal of Topical and Cosmetic Sciences. 2026; 17(1): 15-0. Doi: 10.52711/2321-5844.2026.00004.
18. Rangu Nirmala, Billa Sravani, V. Uma Maheshwari Rao. A Comprehensive Review on Hydrogels: Classification, Synthesis and Smart Hydrogels. Research Journal of Pharmaceutical Dosage Forms and Technology. 2026; 18(2): 141-6. Doi: 10.52711/0975-4377.2026.00022.
19. Nidhi Pimple, Shital Kalekar. Advances in Herbal Drug Technology. Research Journal of Pharmacognosy and Phytochemistry. 2026; 18(2): 156-2. Doi: 10.52711/0975-4385.2026.00022.
20. Jyoti Joshi, Devi P. Bhandari, Rajeshwari Ranjitkar, Laxman Bhandari and Paras M. Yadav. Review on formulation and evaluation of herbal soap, shampoo and facewash gel. J. Pi Res. 17(1): 112.
21. Cabanes J, Chazarra S, Garcia-Carmona F. Kojic acid, a cosmetic skin whitening agent, is a slow-binding inhibitor of catecholase activity of tyrosinase. J Pharm Pharmocol. 1994; 46(12): 982-5.
22. Arpana Ajay Bachhav, Sanjusha Sanjay Birari, Javesh K. Patil, S. P. Pawar. Review on Anti Acne Herbal Facewash Gel. Research Journal of Topical and Cosmetic Sciences. 2026; 17(1): 89-7. Doi: 10.52711/2321-5844.2026.00015.
23. Vaishnavi S. Salunkhe, Namrata S. Ghorapade, Sneha K. Sanka pal, Sayali R. Zanje. A Review on Cosmetic Science Preparation and Evaluation of Facial Scrub. Research Journal of Topical and Cosmetic Sciences. 2026; 17(1):83-8. Doi: 10.52711/2321-5844.2026.00014.
24. Prashant. G. Shimpi, Neha. P. Patil, Krutdyna. P. Patil, Mrunal. D. Pendalkar, Sunil. P. Pawar, Gaurav. B. Sonawane. Review on Formulation and Evaluation of Herbal gel of Moringa oleifera and Aloe vera for management of Acne. Research Journal of Topical and Cosmetic Sciences. 2026; 17(1): 77-2. Doi: 10.52711/2321-5844.2026.00013.
25. Cosmetic Ingredient Review (CIR). (2021). Review of Cosmetic Ingredients. CIR Expert Panel.
|
Received on 18.05.2026 Revised on 22.07.2026 Accepted on 04.09.2026 Published on 15.10.2026 Available online from October 24, 2026 Res. J. Pharma. Dosage Forms and Tech.2026; 18(4):297-304. DOI: 10.52711/0975-4377.2026.00041 ©AandV Publications All Right Reserved
|
|
|
This work is licensed under a Creative Commons Attribution-Non Commercial-Share Alike 4.0 International License. Creative Commons License. |
|